www.heavensgatel2.fora.pl

[op49oppd]

by Marshall Brain
Please copy/paste the following text to properly cite this HowStuffWorks article:
Photoelectric Detectors
Did You Know?
Fire sensors were developed from technology NASA uses to enhance photos of distant planets. Learn more about cool NASA innovations in this interactive animation from Discovery Channel.
Occasionally, you will walk into a store and a bell will go off as you cross the threshold. If you look,Capsule filling machine,Emulsification machine,Liq,[link widoczny dla zalogowanych], you will often notice that a photo beam detector is being used. Near the door on one side of the store is a light (either a white light and a lens or a low-power laser),[link widoczny dla zalogowanych], and on the other side is a photodetector that can "see" the light.
When you cross the beam of light, you block it. The photodetector senses the lack of light and triggers a bell. You can imagine how this same type of sensor could act as a smoke detector. If it ever got smoky enough in the store to block the light beam sufficiently,[link widoczny dla zalogowanych], the bell would go off. But there are two problems here:
It's a pretty big smoke detector.
It is not very sensitive. There would have to be a LOT of smoke before the alarm would go off -- the smoke would have to be thick enough to completely block out the light. It takes quite a bit of smoke to do that.
Photoelectric smoke detectors therefore use light in a different way. Inside the smoke detector there is a light and a sensor, but they are positioned at 90-degree angles to one another, like this:




In the normal case, the light from the light source on the left shoots straight across and misses the sensor. When smoke enters the chamber, however, the smoke particles scatter the light and some amount of light hits the sensor:




The sensor then sets off the horn in the smoke detector.
Photoelectric detectors are better at sensing smoky fires, such as a smoldering mattress.