logoxgvb
Joined: 30 Aug 2010
Posts: 1580
Read: 0 topics
Warns: 0/5
Location: hdfttv
|
 Posted: Tue 18:38, 25 Jan 2011 Post subject: Moncler online Exposure and post-M block by splici |
|
|
,[link widoczny dla zalogowanych]
Exposure and post-M block by splicing
Light. The reason is simple, not saying much. (Wenning Note: The camera's automatic brightness of the sky prevail in the bright sky turned into a gray,[link widoczny dla zalogowanych], so dark even other features. In addition, the different brightness of the sky in different azimuths, auto exposure but can the sky Brightness First of all, I am the first of two pictures was observed. Found that, as used in the filming of the A block exposure, resulting in the exposure of two pictures are quite different; secondly, because no horizontal adjustment of moving, two photographs are not the same horizontal line. These two issues to be resolved which one,[link widoczny dla zalogowanych], I choose to stitch the horizon before adjustment, then adjust the color. The following is the production process. 1. The two pictures on the same document: the Figure 2 with the move tool to drag the figure 1.2. Bring up the menu in the window layer panel, and in the 3. Select stitching. As a part of two photos overlap, so we can choose a photo to another photo coverage, so that the position of overlap is consistent (for this mosaic, I chose to cover in Figure 1, Figure 2). 4. Figure 1 where the layer will be placed in the top of the Layers palette, then adjust the value of Figure 1, the transparent layer (70% to 50%). This can also see the two pictures it, rather than 5. When the two pictures together, we found that the level and perspective problems. We use the command Ctrl + T to adjust until the two graphs overlap consistent. 6. The sharp edge that I use the eraser tool and choose a soft brush them altered, so that connection appears 7. Picture a good fight,[link widoczny dla zalogowanych], you can be the school colors. I used this method is relatively simple: After adjustment with no light or dark tones of the level of loss. Note that: At this point do not merge layers, so the Auto Levels command only affects the current layer. As for when to merge layers, I think the best is after the color adjustment ~ To. 8. Auto Levels When done, the fog is gone,[link widoczny dla zalogowanych], but there are two differences in the density of photos - the brightness with the Ctrl + M ~ step further into the adjustment. 9. Contrast and density adjustment, and then Ctrl + B for adjustment of color Figure 1 Figure 2 Figure 3 whole. Color layers can be merged after the reunification. 10. The overall level of the photo to make adjustments, save the image. Thus, the stitching is completed. (High, editing]
相关的主题文章：
[link widoczny dla zalogowanych]
[link widoczny dla zalogowanych]
[link widoczny dla zalogowanych]
The post has been approved 0 times
|
|
